Kenwood DPF-J5010 - Manual (Page 16)

16
CD-224M/DPF-J5010 (En)
: Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode)
SET
ABC
2
DEF
3
JKL
5
GHI
4
MNO
6
1
TUV
8
PRS
7
WXY
9
QZ
0
& ( ) – /
+100
' , : ? !
+10
SET
CHARACTER/
P.MODE
6
G P 3 M E S E L T C D 1 S I C
G P 0 M E 1 2 D 0 0 D 1 S I C
G P 0 M E 1 2 D 0 0 T 1 - - C
∞ DISC SKIP 5
Use the following procedure to select desired tracks (up to
32 tracks) from up to 200 discs and program them in the
desired order.
1
Press so that the PGM indicator lights.
Preparation
÷ Load discs into the carousel. 0
÷ Set the CD player to stop mode.
Programming tracks in desired order
(PGM mode)
2
Select the disc.
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
÷ When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected while looking at the recorded contents.
“Registration of Title Name”
)
÷ If you make a mistake, press the CLEAR key and enter the disc No. from
the beginning.
÷ Disc numbers which do not contain discs can be selected, but they are
canceled at the time of playback.
÷ To program the entire disc, press the SET key without inputting the
track number. “ALL” will be displayed.
÷ Program other tracks in the desired order by repeating steps 2 and 3.
÷ Up to 32 tracks can be programmed. “FULL” is displayed when no
more tracks can be programmed.
÷ If you make a mistake, press the CLEAR key and restart from step 2.
Press the numeric keys in the following order...
Track No.8 : 8
Track No.14 : 14
Track No.20 : 2)
÷ Tracks will be played in the order they were programmed (in order of P
Nos.).
÷ When the 4 or ¢ key is pressed during playback, the track will be
skipped in the direction of the pressed button.
Previous disc Next disc
Within 8 seconds!
1Select the disc number.
2Set the input.
Go to step 3 within 8 sec.
3
Select the track number.
1Input the track number.
Within 8 seconds!
2Set the input.
4
Start playback.