Kenwood DPF-J5010 - Manual (Page 19)

19
CD-224M/DPF-J5010 (En)
: Keys and controls used in the operations described on this page.
Programming tracks in desired order (PGM mode)
RANDOM
RANDOM
> < < > < E < 1 0 > 2 > < >
RANDOM
∞ DISC SKIP 5
N O 3 E I D C S R R N A O D M
L A 3 L I D C S R R N A O D M
7
6
CHARACTER/SEARCH
DOWN UP
4 ¢
Use the following procedure to activate random playback
which selects a track at random after every track. This fea-
ture may allow you to play CDs for long hours without
getting tired of.
Preparation
÷ Load discs into the carousel. 0
Playback in a random order
(RANDOM mode)
1
Check that the unit is in the normal play TRACK
mode.
#
2
Select discs.
To select one disc
2Start playback.
Previous disc Next disc
Within 8 seconds!
1Select the disc number.
3Select “ONE DISC RANDOM”.
To select all discs
Select “ALL DISC RANDOM”.
÷ The disc number can be selected directly by using the DISC SELECTOR
and numeric keys in place of the DISC SKIP keys.
Each press switches the modes as follows:
1 ONE DISC RANDOM
2 ALL DISC RANDOM
3 RANDOM OFF
The number here changes.
÷ Each time a track ends, the same operation as above is repeated, and
the track selected next is played.
÷ Random play stops after all of the tunes have been played once.
÷ The random playback can also be repeated by pressing the REPEAT
key.
To select another track in the middle of playing one To cancel random playback
÷ Pressing the 4 key once returns to the beginning of the track being
played.
÷ Press the 7 key to stop playback.
÷ Normal playback will be performed when RANDOM OFF is selected.
or
Select “RANDOM OFF”.
For random music type §