To change or delete a title name – Kenwood DPF-J5010 User Manual
Page 22
22
CD-224M/DPF-J5010 (En)
: Keys and controls used in the operations described on this page.
Registration of Title Name
DELETE/
CLEAR
CURSOR
L
R
1
¡
CURSOR
L
R
1
¡
SET
INSERT
C
A
Z
B
= >
O
S
E
N
O
B
Y
D
T
C
O
M
L
N
= >
O
S
E
N
O
B
Y
D
T
C
CHARACTER/SEARCH
DOWN
UP
4
¢
Preparation
÷ Close the door panel.
0
1
Perform steps
1 and 2 of “Assigning Title
Names”.
)
÷ Call the disc to be changed.
÷ Deletion mode is cancelled when the MODE key is pressed.
To change or delete a title name
2
Change or delete characters one by one.
1Select overwrite or insert mode.
£
Press until the character to be entered
comes to the position of the flashing
cursor.
Change
2Move the cursor to the desired char-
acter (to be changed).
3Select a character.
4Set the selected character.
1Move the cursor to the desired char-
acter (to be deleted).
Deletion
2Press the DELETE key.
÷ If the title to be changed is too long to be displayed on the display
section, press the
1 or ¡ key to scroll the display so that the
characters hidden until then appear.
+ Move with the 1 ¡ keys =
Flashing cursor
÷ The characters also can be selected with the DISC SKIP knob on the
main unit. Turn the knob until the character to be entered comes to the
position of the flashing cursor.
÷ When a title name is to be deleted, delete all characters one by one.