Kenwood TS-2000 - Manual (Page 56)

48
10 SUB-RECEIVER
AUTOMATIC SIMPLEX CHECK (ASC)
You can also use ASC functions on the 144 MHz and
430/ 440 MHz bands of the sub-receiver. While using
a repeater, ASC periodically monitors the strength of
the uplink frequency to check the signals. Press and
hold [TF-SET] until “[R]” appears on the SUB band
display. Refer to “AUTOMATIC SIMPLEX CHECK”
{page 34} for function and control details.
TRANSMITTING A TONE
You can assign another Tone to the sub-receiver.
Refer to “TRANSMITTING A TONE” {page 33} for
function and control details.
MEMORY
You can also utilize all the memory functions
{page 58}, including the Quick Memory function
{page 64}, while you are operating the sub-receiver.
However, the operating frequency range is limited to
the sub-receiver’s frequency coverage. You cannot
recall any memory channels that are outside the sub-
receiver’s frequency coverage. These channels are
automatically skipped when they are recalled on the
sub-receiver.