Using the flash – Kodak EasyShare C433 User Manual

Page 13

Advertising
background image

Taking pictures and videos

www.kodak.com/go/support

7

2 If the camera is not focusing on the desired subject (or if the framing marks

disappear), release the Shutter button, recompose the scene, and repeat step 1.

3 Press the Shutter button completely down to take the picture.

NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus

Zone (see

page 20

) and set Center Zone, the framing marks are fixed at Center Wide.

Using the flash

Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.

Flash-to-subject distance

Zoom position

Flash distance

Wide angle

2–11.5 ft (0.6–3.5 m) @ ISO 200

Telephoto

2– 6.6 ft (0.6–2.0 m) @ ISO 200

Flash modes

Flash fires

Auto
Flash

When the lighting conditions require it.

Fill

Every time you take a picture, regardless of the lighting conditions. Use
when the subject is in shadow or is “backlit” (when the light is behind the
subject).

Red-
eye

Once, so the subject’s eyes become accustomed to the flash, then fires
again when the picture is taken. (If the lighting conditions require flash but
do not require Red-eye reduction, the flash may fire only once.)

Off

Never.

Press the

The current flash mode is shown in the LCD

button repeatedly to scroll

through flash modes (see Flash modes below).

status area.

Advertising
This manual is related to the following products: