Using exposure compensation to adjust brightness, Using the self-timer – Kodak EasyShare C433 User Manual

Page 25

Advertising
background image

Doing more with your camera

www.kodak.com/go/support

19

Using exposure compensation to adjust brightness

In Auto, Landscape, or Close-up mode, you can adjust exposure compensation to
make your pictures darker or lighter. Press

to decrease exposure compensation

and

to increase exposure compensation.

The exposure compensation level is shown on the LCD

, and the LCD gets

dimmer or brighter.

Using the self-timer

The Self-timer creates a 10-, 2-second, or 2-shot delay between the time you press
the Shutter button and the time the picture or video is taken.

To cancel the self-timer, follow steps 1 and 2, select Off, then press OK.

Use the same procedure to take a video, but:

Turn the Mode dial to Video

.

Press the Shutter button completely down.

NOTE: The video stops when no storage space remains. Only the 2- and 10-second options are available in

video mode.

1

2

Use

to highlight Self Timer

, then press OK.

• 2-shot (one picture taken after 10 seconds and another

In any Still mode, press the Menu button.

• 10-second delay (so you have time to get into the scene)

• 2-second delay (for a steady, auto-shutter release

on a tripod

picture taken 8 seconds later)

3

Use

to highlight a self-timer setting, then press OK.

4

Place camera on a flat surface or tripod.

Compose the scene.

5

Press the Shutter button halfway, then completely down.

6

Advertising
This manual is related to the following products: