Lucent Technologies 585-300-701 - Manual (Page 32)

26 * H or * 4 = Help / Current Options
A Portable Guide to Voice Messaging
585-300-701 Issue 3
November 1994
Create List
1. Press 5 1 1 from the Activity Menu.
2. Enter list ID (up to 6 letters or digits) and press #.
3. Press one of the following:
- 1 to make the list private.
- 2 to make the list public.
4. Enter an address and press #.
5. Repeat step 4 until list is complete.
6. Press # to approve.
Delete List
See Scan List Summaries below.
Scan List Summaries
1. Press 5 1 2 from the
Activity Menu.
2. Listen to the list
summary.
3. Press any combination
of the following:
- # to skip to next list.
- * D or * 3 to delete
the entire list.
- 0 to review/modify
list members.
(Go to step 4 of
Review/Modify List.)
Tips
When creating a list, you
can also append an exist-
ing list by entering
* L or *
5 (at step 4). NOTE: after
you append a list, the sys-
tem asks for more exten-
sions. Do not add
extensions of the list just
appended.
Specify an address as a
number or name — press
* A or * 2 to switch modes.
(See the alphabetic key-
pad reference on p. 34.)
Delete addresses in two
ways: 1) Review the list
until you find each
address, then press
* D or
* 3; or 2) At step 4 on page
27, press 1 immediately,
enter the address to be
deleted, and press
* D or
* 3. Repeat for other
addresses.
Mailing Lists