Lucent Technologies CIB40 - Manual (Page 6)

Customer Administerable Timer
The Customer Administerable Timer is used in conjunction with the Call
Forwarding and Remote Line Access features. The timer disconnects
calls made via Call Forwarding and/or Remote Line Access after these
calls reach a system-wide call duration limit. The Customer
Administerable Timer can be set to a value of from 1 to 999 minutes.
To administer the Customer Administerable Timer:
1.
2.
3.
4.
5.
Enter administration mode by sliding the T/P switch to P
and touching Administer.
Dial *68.
Dial the desired three-digit timer value. Three digits must
be dialed. For example, a timer value of 1 minute would
be dated as 001, a value of 10 minutes would be dialed
as 010, and a value of 120 minutes (2 hours) would be
dialed as 120. To reset the timer to its default value of
no time limit, dial 000.
Touch Administer.
The console beeps twice.
Leave administration by sliding the T/P switch to the center
position.
R E C Y C L E D P A P E R