LG 3803 - Manual (Page 40)

6. PRESET, GROUP
6.1 Preset
Up to 100 setting conditions can be stored and recalled by using the front panel key.
• Storing Data
(1) Set the CODING, CHANNEL, LEVEL, etc.
(2) Press the ADDRESS key. The PRESET number LED brinks.
(3) Specify the address to store data by pressing the ↑ or ↓ key in the PRESET
column, or enter address by using the numeric keypad.
(4) When the address is directly set by using the numeric keypad, press the ENTER
key.
(5) Pressing the STORE key stores data.
There are two methods to recall the setting conditions:
• Direct recall
To recall the desired memory number, press the ↑ or ↓ key in the PRESET group.
• Specifying address
(1) Press the ADDRESS key. The PRESET number indicator LED brinks.
(2) Specify the address to store data by pressing the ↑ or ↓ key in the PRESET
column, or enter address by using the numeric keypad.
(3) Press the ENTER key to enter data.
(4) Pressing the RECALL key recalls data.
6.2 GROUP
Up to ten groups can be set. Preset data can easily be used by incrementing or
decrementing the preset range for each group.
• Setting group to be used
(1) Press the Pre. Group (F1) key on the UTILITY screen to enter group setting
screen.
(2) Press the Preset Group (F5) key to select the desired group number.
• Setting preset range
(1) Select the group number on the group setting screen.
(2) Press the No. Input (F2) key to enter preset number setting screen, then set the
Begin and End numbers.
＊ The End number must be larger than the Begin number.
• Recalling preset data
(1) Press the ↑ or ↓ key, or the numeric keypad to specify the number to recall
data. Refer to Section 4.5.
＊ Use the preset number within the specified range in the group being set.
Otherwise, the preset number is canceled.
6-1