Little Wonder SINGLE EDGED 1912 - Manual (Page 14)

LIMITED SERVICE & WARRANTY POLICY
FOR ELECTRIC HEDGE TRIMMERS
All Little Wonder Electric Hedge Trimmers are guaranteed against defects in material and
workmanship for a period of 2 YEARS from date of purchase, when used for RESIDENTIAL SERVICE, or
1 Year when used for COMMERCIAL SERVICE. Any Little Wonder Electric Hedge Trimmer or part
found to be defective within the warranty period is to be returned to any registered Little Wonder Dealer.
Transportation charges for parts and units submitted for replacement under this warranty must be
borne by the purchaser.
THIS WARRANTY shall not be effective if the product has been subject to misuse, negligence or
accident, used in cutting hedges or shrubs greater than 1/2" in diameter, used to cut foreign objects
such as wire, rocks, or fences, or if the product has been repaired or altered outside of our Southampton
factory or any registered Little Wonder dealer, in any respect which affects its condition or operation.
LITTLE WONDER shall not be liable for any special indirect or consequential damages arising from
defective equipment. Any implied warranty, including merchantability of fitness for a particular
purpose, shall not extend beyond the written warranty period.
THIS WARRANTY shall only be effective if the enclosed Warranty/Registration card is properly filled
out and returned to Little Wonder, Div. of Schiller-Pfeiffer, Inc. at time of purchase.
Manufactured by:
LITTLE WONDER
®
DIVISION OF SCHILLER-PFEIFFER, INCORPORATED
1028 STREET ROAD, P.O. BOX 38
SOUTHAMPTON, PA 18966
PHONE 215-357-5110 • FAX 215-357-8045
Specifications. descriptions, and illustrative material in this literature are as accurate as known at the time of publication, but are subject to change without notice.
©2003, LITTLE WONDER , Division Schiller-Pfeiffer, Inc.
P/N 310700
6-03
VIII. SPECIFICATIONS
Model
Cutting Length Weight
cm (in.) kg (lb)
1912 48 (19) 3.49 (7.7)
1922 48 (19) 3.89 (8.6)
2412 61 (24) 3.62 (8.0)
2422 61 (24) 4.04 (8.9)
3012 76 (30) 3.85 (8.5)
3022 76 (30) 4.59 (10.1)
All listed hedge trimmers are rated for
230 volts AC at 50 hertz.
The A-weighted emission sound pressure level
at the operator position has been measured at:
L
PA
= 80 dB(A). These measurements were
made in accordance with EN ISO 11201:1996
under no-load conditions.
The Hand-Arm weighted r.m.s. vibration
measured at the handles in accordance with
EN 50144-1 part 13.3 at rated conditions, no
load was:1.0 m/s
2 .