Little Wonder SINGLE EDGED 1912 - Manual (Page 4)

WARNING DANGER
IF TRIMMER IS USED IMPROPERLY OR SAFETY PRECAUTIONS ARE NOT FOLLOWED,
THE USER RISKS SERIOUS INJURY TO THEMSELVES AND OTHERS.
READ AND UNDERSTAND THE RULES FOR SAFE OPERATION AND ALL
INSTRUCTIONS IN THIS MANUAL.
A. S
AFETY
D
ECALS AND
M
OLDED
S
YMBOLS
Important parts of the safety system incorporated in
both Single Edge and Double Edge trimmers are the
warning and informational decals and molded-in
symbols found on various parts of the trimmer. These
decals must be replaced in time due to abrasion, etc.
It is your responsibility to replace the decals or molded
housing when they become hard to read. The locations
of these safety features are shown below. See page 13
for their part numbers when ordering replacements.
4
B. S
AFETY
S
YMBOLS
I
DENTIFICATION
Single Edge Trimmer Double Edge Trimmer
Guard
Serial Number decal
Side Handle
Rear Handle
On/Off Switches
Loop Handle
Guard
On/Off Switch
On/Off
Switch
Safety Symbols
(Molded into Part No. 310400 Main Housing Set}
Rear Handle
WHAT THE SYMBOLS MEAN:
1. Read the instructions.
2. Do not expose to rain.
3. Remove plug from main (electric
power source) immediately if cable is
damaged or cut.
4. Double insulated.
1 2 3 4
WARNING DANGER
TO REDUCE THE POTENTIAL FOR
ACCIDENTS, COMPLY WITH THE
SAFETY INSTRUCTIONS IN THIS
MANUAL. FAILURE TO COMPLY MAY
RESULT IN SERIOUS PERSONAL
INJURY AND OR EQUIPMENT AND
PROPERTY DAMAGE.
WARNING DANGER
THIS SYMBOL POINTS OUT
IMPORTANT SAFETY INSTRUCTIONS.
WHEN YOU SEE THIS SYMBOL,
HEED IT’S WARNING!!
STAY ALERT!!
! !
!
! !
!
!
! !