Mounting the dc260 at desktop, Connecting devices, 2 mounting the dc260 at desktop – Lumens Technology DC260 User Manual
Page 13: 3 connecting devices
Advertising
4.2 Mounting the DC260 at desktop
1. Please set up the DIP Switch settings first. Refer to
Chapter 5 “DIP
Switch Settings”
in the DC260 user manual.
2. Please refer to the
Base Installation Guide
for installation instructions
for all parts.
4.3 Connecting devices
4.3.1 Step 1: Plugging in the power outlet
<Note> Appearance of power cord may vary with countries/regions.
4.3.2 Step 2: Connecting with components
AC Outlet
¾
Connecting to a projector or monitor
z
Use VGA cable to connect VGA OUT connector on DC260 to a
projector or the VGA IN connector on a monitor.
¾
Connecting to a TV
1. Use C-Video cable to connect TV.
English - 12
Advertising