Lexmark 2600 SERIES 4433 - Manual (Page 50)

Troubleshooting
Using the printer troubleshooting software
(Windows only)
The Lexmark Service Center provides step-by-step troubleshooting help and contains links to printer maintenance
tasks and customer support.
To open the Lexmark Service Center, use one of these methods:
Method 1 Method 2
If it appears on an error message dialog, click the For
additional assistance, use the Lexmark Service
Center link. 1 Do one of the following:
• In Windows Vista, click  All Programs, and then
select the printer program folder from the list.
• In Windows XP, click Start  Programs or All
Programs, and then select the printer program folder
from the list.
2 Select Lexmark Service Center.
Setup troubleshooting
Power button is not lit
These are possible solutions. Try one or more of the following:
P
RESS POWER BUTTON
Make sure the printer is on by pressing .
D
ISCONNECT AND RECONNECT THE POWER CORD
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet, and then from the printer.
3 Plug the cord all the way into the power supply on the printer.
4 Plug the cord into an electrical outlet that other electrical devices have been using.
5 Press to turn the printer on.
Troubleshooting
50