LG C Series - Manual (Page 51)

Chapter 7. Function list
Function group 2
LED
display
Parameter
Name
Min/Max
Range
Description
Factory
defaults
Adjustable
during run
Page
H82 [2
nd
motor
Decel time]
10.0 O
H83 [2
nd
motor
base
frequency]
30/400
[Hz] 60.0 X
H84 [2 nd motor V/F
pattern]
0/2 0 X
H85 [2 nd motor
forward torque
boost]
5 X
H86 [2
nd
motor
reverse torque
boost]
0/15 [%]
5 X
H87 [2 nd motor
stall
prevention
level]
30/150
[%] 150 X
H88 [2
nd
motor
Electronic
thermal level
for 1 min]
150 O
H89 [2
nd
motor
Electronic
thermal level
for
continuous]
50/200
[%]
100 O
H90 [2
nd
motor
rated current]
0.1/20
[A] 1.8 X
10-
16
ƒ This parameter is used to initialize
parameters back to the factory default
values.
0 -
1
All parameter groups are initialized
to factory default value.
2 Only Drive group is initialized.
3 Only Function group 1 is initialized.
4 Only Function group 2 is initialized.
H93 [Parameter
initialize]
0/5
5 Only I/O group is initialized.
0 X 10-
17
H94 [Password
register]
0/FFF Password for H95-[Parameter lock]. 0 O 10-
18
This parameter is able to lock or unlock
parameters by typing password registered in
H94.
UL (Unlock) Parameter change enable
H95 [Parameter
lock]
0/FFF
L (Lock) Parameter change disable
0 O 10-
19
51