LG C Series - Manual (Page 9)

Chapter 1. Basic information & precautions
1. Basic information and precautions
1.1 Important precautions
Unpacking
and inspection Inspect the inverter for any damage that may have occurred during shipping. To verify
the inverter unit is the correct one for the application you need, check the inverter
type, output ratings on the nameplate and the inverter is intact.
Type of the inverter
CI 001 - C2 - 1P
Motor rating Series Name
001 0.4 [kW]
002 0.75
[kW]
003 1.5 [kW]
CERUS
Inverter -
004 2.2 [kW]
-
C series inverter
(200V)
- Single Phase
Accessories
If you have found any discrepancy, damage, etc., contact your sales representative.
Preparations
of instruments
and parts
required for
operation
Instruments and parts to be prepared depend on how the inverter is operated. Prepare
equipment and parts as necessary.
Installation To operate the inverter with high performance for a long time, install the inverter in a
proper place in the correct direction and with proper clearances (Refer to Installation
section 2-1).
Wiring Connect the power supply, motor and operation signals (control signals) to the
terminal block. Note that incorrect connection may damage the inverter and peripheral
devices (Refer to Wiring section 3-1).
Inverter Type
Input power Rating
Output Power Rating
Inverter Capacity (HP)
Bar Code
Serial Number
9