LST NTM2408-1 User Manual

Description

Advertising
background image

0786–CPD–20529

© LABOR STRAUSS SICHERUNGSANLAGENBAU GMBH • A-1231 WIEN • WIEGELESTRASSE 36 • TEL +43 1 52114-0 • FAX +43 1 52114-27
[email protected] • WWW.LST.AT • ALL RIGHTS RESERVED

NTM2408-1_DBL_LST_EN_0851.PDF • PAGE 1

A

Building Safety. Building Security.

Description

The Power Supply Module NTM2408-1 serves for the

safe supply of devices, which need a nominal voltage of

24VDC. The typical fi elds of application include fi re de-

tection systems and extinguishing controls or any other

applications requiring a safe power supply.

The output voltage of the integrated switched-mode

power supply is current-limited and short-circuit-protec-

ted.

The optional stand-by batteries guarantee an uninterrup-

ted power supply in the event of a mains power fault.

At a typical charging time of 24 hours, batteries with a

maximum capacity of 220Ah can be charged. The inte-

grated protection against total discharge and the tem-

perature compensated battery charging are the basis

for a long battery life.

The battery monitoring according to EN 54-4:2006 in-

cludes the periodical measurement of the battery volta-

ge under load and the internal resistance of the battery.

The integrated earth leakage monitoring of the module

can be deactivated for special applications.

The module is designed for installation into a power sup-

ply housing. For that purpose, three different housings

are available. At the front of the housing, seven light

emitting diodes indicate the operation as well as pos-

sible causes of faults.

By means of the integrated test function, a functional

check can be performed and the present value of the

internal resistance of the battery can be read out. With

that, the maintenance of power unit and batteries is es-

pecially easy and timesaving.

• Uninterrupted power supply for

devices with 24VDC, max. 8.4A

• Current-limited, short-circuit-

protected output

• Monitoring of battery charging and

internal resistance of the batteries

• Installation into wall-mount cabinet or

19“ housing

• Status display at the housing front
• Complies with EN 54-4:2006

Specifi cations

Operating voltage

230V +10/-20%, 47 – 63Hz

Output voltage

typ. 27.6VDC

Output current

max. 8.4A

Ambient temperature

-5°C to +50°C

Relative humidity

max. 95% (no condensation)

Dimensions L × W × D

290 Ч 220 Ч 70 (mm)

Weight

1.5kg

Approvals

VdS G208125

0786-CPD-20529

Order number

317021

Order name

Power Supply Module NTM2408-1

Advertising