Land Pride QuickHitch RBT3584 - Manual

24
Blades Rear
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
RBT35 Series
RBT3584 RBT3596
Blade Width 84" 96"
Approximate Weight (lbs.)
with manual links 709 lbs. 745 lbs.
Maximum Tractor Horsepower 80 HP for 2 Wheel Drive and 65 HP for 4 Wheel Drive
Maximum G.V.W. (lbs.) 9500 lbs.
Hitch Type Cat. 1 & 2
Fits Land Pride Quick-Hitch
Blade Angle
Manual Linkage:
Hydraulic Cylinder:
With blade facing forward or reversed
Up to 40
o
in 10
o
increments clockwise and counterclockwise
Up to 50 degrees clockwise and counterclockwise
Angle Cylinder 3 1/2" X 14" X 1 1/4"
Blade Offset Manual Linkage
Hydraulic Cylinder
Up to 30 inches left and right in 9 positions (Center, 4 left and 4 right)
Up to 30 inches left and right
Offset Cylinder 3 1/2" X 14" X 1 1/4"
Blade Tilt Manual Ratchet Jack
Hydraulic Cylinder
Maximum 20
o
up and 20
o
down with blade facing forward or reversed
Maximum 20
o
up and 20
o
down with blade facing forward or reversed
Tilt Cylinder 2" X 6" X 1 1/4"
Moldboard King Pin 3" diameter
Moldboard Height 17" tall
Moldboard Thickness 5/16" reinforced, 3/16" tapered reinforcement channel
Cutting Edge 1/2" x 6" Heat treated, Replaceable & Reversible (Double bevel)
Main Frame Construction Fully Welded Tubular Construction
Parking Stand Retractable
Accessories Manual or Hydraulic Single Gauge Wheel
Skid Shoes, End Plates, Hydraulic Selector Valve and Cushion Valve
301-251S 6/11/13
26808
Top View Side View