LG P1BRENTW-A User Manual

Page 12

Advertising
background image

10

3.3.7 Refractory Replacement

The intense heat of the fire will normally cause hairline cracks in the refractory. These
cracks can be minimized by proper curing as described in "First Fires". They will not
normally diminish the effectiveness of the refractory. If large cracks develop, then the
refractory should be replaced. To replace the refractory bricks, follow these steps:


1. Remove the front refractories
2. Remove the bottom refractory
3. Remove the left side refractory
4. Remove the right side refractory
5. Remove the back refractory
6. Remove the front ceramic baffle
7. Remove the rear ceramic baffle

To install the new refractories, follow
the above steps in reverse.

Figure

2

3.3.8 Door Installation

The door must be installed only when
the installation of the BRENTWOOD
is completed. All you have to do is fit
the male part of the hinge, already on
the door, to the female part, which is
on the fireplace.

To remove the door, simply pull the
door up from the hinges.

The door adjustment has been set at
the factory. If the fit is still not
perfect, you can adjust the door using
the hinge screws.

Figure

3

Advertising