Lang Manufacturing LG-72S - Manual (Page 5)

4
EQUIPMENT DESCRIPTION
ELECTRIC GRIDDLE
EXTERIOR
♦ Griddle
The griddle dimensions are 17” (43.18cm) High, 30” (76.20cm) Deep, and width is dependent on
the actual model number.
The Sides, Bottom, and Rear wall are constructed of double wall stainless steel, which allows
closer installation to combustible surfaces.
The griddle surface is made of 1” thick, highly polished steel to reduce hot and cold spots, recovery
problems, warping, and ensure even heat to the edges of the griddle.
♦ XL Hood
The Hood dimension (including griddle) are 22¼” (55.88cm) High with hood down, 44¾”
(113.67cm) High with hood up, 31½” (80cm) Deep, and 24” (61cm) Wide.
The Hood wrap is constructed of stainless steel and uses infrared heat to broil the product.
♦ Pane Bella
The Pane Bella dimensions are 12” (30.5cm) High with hood down, 24.5” (62.25cm) with hood up,
16” (40.5 cm) Deep and width is dependent on model number.
CONTROLS
The Electric Griddle is available either with the Lang Accu-Temp (LG-24, 36, 48, 60, 72) controls or the
Lang Selectronic (LG-24S, 36S, 48S, 60S, 72S):
♦ LG (ACCU-TEMP)
Each twelve-inch section has its own easy to use manual thermostat with a temperature range from
175 °F to 450°F in 50° increments.
Each twelve-inch section has a set of 6 K.W. elements for high efficiency, quick recovery and
outstanding performance.
♦ LGS (SELECTRONIC)
Each twelve-inch section has its own temperature selector switch that snaps into place to lock in
any temperature from 175 °F to 450°F in 25° increments.
Each twelve-inch section of the griddle is controlled by an area sensitive RTD probe, which can
sense and react to a temperature change of +/- 4 °F.
Each twelve-inch section has a set of 6 K.W. elements for high efficiency, quick recovery and
outstanding performance.
♦ Pane Bella
Each twelve-inch section has its own easy to use manual thermostat with a knob.
Each 12” section has its own 900 Watt element in the bottom and 720 Watt in the top.