Instrumentation – Lincoln 1999 Town Car User Manual

Page 19

Advertising
background image

DIST TO EMPTY (DTE)

This function estimates
approximately how far you can drive
with the fuel remaining in your tank
under normal driving conditions.
Remember to turn the ignition OFF
when refueling your vehicle.
Otherwise, the display will not show
the addition of fuel for a few kilometers (miles).

The DTE function will flash for 5 seconds and sound a tone for 1 second
when you have approximately:
• 80 km (50 miles) left before you run out of fuel
• 40 km (25 miles)
• 16 km (10 miles)
If “CO” or “CS” is displayed, there is a problem with the fuel indication
system and you should contact your dealer for service as soon as
possible.

AVG SPEED

To use this function, select AVG
SPEED and press the RESET
control. Your average speed from
that point will be displayed until
RESET is pressed again.

TRIP A B

These two functions allow you to
see how far you have traveled since
you last reset. Trip A and Trip B are
completely independent and must
be reset individually.

To reset either trip feature to zero,
press the RESET control while the
appropriate trip distance feature
(A or B) is displayed.

FUEL ECON AVG

FUEL REMAIN

DIST TO EMPTY

AVG SPEED

TRIP A B

E/M

FUEL ECON AVG

FUEL REMAIN

DIST TO EMPTY

AVG SPEED

TRIP A B

E/M

FUEL ECON AVG

FUEL REMAIN

DIST TO EMPTY

AVG SPEED

TRIP A B

E/M

SELECT

RESET

Instrumentation

19

Advertising