Controls and features – Lincoln 1999 Town Car User Manual

Page 56

Advertising
background image

Do not shift the gearshift lever into N (Neutral) with the speed
control on.

To turn speed control off

• Press OFF or
• Turn off the vehicle ignition.

Once speed control is switched off, the previously programmed set speed
will be erased.

To set a speed

• Press SET/SET ACC/SET ACCEL.

For speed control to operate, the
speed control must be ON and
the vehicle speed must be greater
than 48 km/h (30 mph).

If you drive up or down a steep hill, your vehicle speed may vary
momentarily slower or faster than the set speed. This is normal.

Speed control cannot reduce the vehicle speed if it increases above the
set speed on a downhill. If your vehicle speed is faster than the set
speed while driving on a downhill, you may want to shift to the next
lower gear or apply the brakes to reduce your vehicle speed.

If your vehicle slows down more than 16 km/h (10 mph) below your set
speed on an uphill, your speed control will disengage. This is normal.
Pressing RES/RSM/RESUME will re-engage it.

ON

OFF

RES

SET

ACCEL

COAST

Controls and features

56

Advertising