Lincoln Electric INVERTEC V350-PRO IM708 - Manual (Page 30)

F-5 DIAGRAMS F-5
V350-PRO (CE)
Only qualified persons should install, use or service this machine. using the disconnect switch at the fuse box
WARNING
Turn off input power to the Welding Power Source
Before connecting the wire feeder.
ELECTRIC
SHOCK
CAN KILL
N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION. N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLE AT POWER SOURCE.
TO WORK
- +
14 PIN AMPHENOL
ELECTRODE CABLE TO LN-25
LN-25 WITH K431 OPTION
K432 REMOTE CONTROL CABLE
6 PIN AMPHENOL
N.C. FOR INVERTECS WITH 6 PIN AMPHENOL, K432 CABLE CAN BE CONNECTED DIRECTLY.
K876 ADAPTER
INVERTEC POWER SOURCE
S19899
1-25-91
K876 ADAPTER TO LN-25 - CONNECTION DIAGRAM