Speaker connection, Specification, General – Legacy Car Audio LCD32FD User Manual

Page 7

Advertising
background image

6

SPECIFICATION

GENERAL

Power requirement------------------------------

Current consumption---------------------------------------------------3A MAX.

Maximum output power-------------------------------------------2 x 50 Watts

DC 13.8V negative ground

FM SECTION

Frequency range----------------------------------------------88MHz-108MHz

Usable sensitivity-----------------------------------------------------------10uV.

IF Frequency-----------------------------------------------------------10.7MHz

AM SECTION

Frequency range-------------------------------------------540KHz-1600KHz

LINE -OUT

Output-----------------------------------------250mV@FM10%THD POWER.

Impedance---------------------------------------------------------------600ohm.

CD PLAYER

System-----------------------------------------compact disc audio system.

Usable disc------------------------------------------------------compact disc.

Signal to noise radio -------------------------70dB[1KHz] [IEC-A net work].

Chassis dimensions---------------------------------183[W]X53[H]X160[D].

SPEAKER CONNECTION

NOTE:
In spite of having any kinds of speaker system ,must use 4 ohms
impedance of speaker to reduce the distortion during high volume
level.

3A

FUSE

Speaker connection

+GREEN

-GREEN/WHITE

GREY+

GREY/WHITE-

BLACK GROUND

POWER SUPPLY

YELLOW

AUTO ANTENNA

RED

ANTENNA PLUG

WHITE (L)

RED (R)

RCA LINE OUT PLUG

L

R

Advertising