Restoring factory default settings, Setting the default mode – Lexmark X500N User Manual

Page 115

Advertising
background image

6

Using the keypad, enter the number of minutes for the printer to wait before it enters Power Saver mode.
Available settings range from 1–240 minutes.

7

Press

.

8

Press

to return to the Ready state.

Restoring factory default settings

Menu settings marked with an asterisk (*) indicate the active settings. You can restore the original printer settings,
often referred to as the factory default settings.

1

Make sure the printer is on and Ready appears.

2

From the control panel, press

.

3

Press

or

repeatedly until Admin Settings appears, and then press

.

4

Press

or

repeatedly until Setting Default appears, and then press

.

5

Press

or

repeatedly until Clear Menu Settings appears, and then press

.

6

Press

or

repeatedly until Execute appears, and then press

.

Executing...

appears briefly.

7

Press

to return to the Ready state.

Note: All settings return to the factory default settings except the display language, country or region, date and time,
network settings, and fax directory entries.

Setting the Default mode

Setting the Default mode specifies whether the printer will be in Fax mode or Copy mode following either of these
two events:

The printer is turned on.

The Auto Clear setting times out.

Note: Auto Clear is off by default.

To set the Default mode:

1

Make sure the printer is on and Ready appears.

2

From the control panel, press

.

3

Press

or

repeatedly until Admin Settings appears, and then press

.

4

Press

or

repeatedly until Default Mode appears, and then press

.

5

Press

or

repeatedly to choose Copy or Fax, and then press

.

6

Press

to return to the Ready state.

Note: Copy is the factory default setting.

115

Advertising
This manual is related to the following products: