Accessories, Mounting of cables – Linak TECHLINE LA35 User Manual
Page 16
Advertising
16
Accessories
Cables:
Power cables (Ordered separately)
Order no.
1.5 m cable
0367002-1500
5 m
0367002-5000
0.2 m cable (AMP connectors)
0367006
Signal cable (Ordered separately)
Order no.
1.5 m cable
0367003-1500
5 m
0367003-5000
Mounting of cables
• Unscrew the cover and remove the two blind plugs
• Plug in the power cable and/or the signal cable
• Slide the cover onto the actuator
The torque of the cover screw is app. 4 Nm
Note: When changing the cables on a LINAK actuator, it is important that this is done carefully, in
order to protect the plugs and pins. Please be sure that the plug is in the right location and fully
pressed in before the cable lid is mounted.
Be aware for BUS actuator - please see the installation guide.
Advertising