Mounting on a wall – LG D2342P User Manual

Page 8

Advertising
background image

8

ENG

ENGLISH

ASSEMBLING AND PREPARING

Mounting on a wall

For proper ventilation, allow a clearance of 10
cm on each side and from the wall. Detailed
installation
instructions are available from your dealer, see the
optional Tilt Wall Mounting Bracket Installation and
Setup Guide.

If you intend to mount the Monitor set to a wall,
attach Wall mounting interface (optional parts) to
the back of the set.
When you install the Monitor set using the wall
mounting interface (optional parts), attach it
carefully so it will not drop.
Please use VESA standard as below.

y

y

784.8 mm (30.9 inch) and under

* Wall Mount Pad Thickness : 2.6 mm

* Screw : Φ 4.0 mm x Pitch 0.7 mm x
Length 10 mm

y

y

787.4 mm (31.0 inch) and above

* Please use VESA standard wall mount pad

and screws.

10 cm

10 cm

10 cm

10 cm

Using the Kensington security system

The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit

http://www.kensington.com.

Connect the Kensington security system cable
between the Monitor set and a table.

The Kensington security system is optional.

You can obtain additional accessories from

most electronics stores.

NOTE

Advertising