LG AR702TS - Manual (Page 9)

9
1. POWER ( )
Switches the unit ON and OFF.
RECEIVER/DVD/TV/VCR
To operate the desired function with this remote
control, select the corresponding the buttons.
2. DIGITAL
Press this button to assign one of the digital inputs
to a source.
Selects HDMI 1 or HDMI 2 on the HDMI mode.
DIMMER
Press this button to adjust the brightness of the
display window.
SLEEP
Press this button to set the sleep timer.
AUTO CAL.
Starts Audyssey 2EQ automatic speaker setup;
and turns Audyssey 2EQ On and Off when setup
has been performed.
SPK LEVEL
Adjusts the speaker level from -10dB to +10dB.
TEST TONE
Checks the position and sound balance of
speakers in the following order.
TONE CTRL
Controls the BASS, MIDDLE, and TREBLE.
AV SYNC.
Adjusts the Audio Delay.
LISTENING MODE
- SURROUND
Selects various surround effect.
- DSP (Digital Signal Processor)
Selects DSP (Digital Signal Processor) mode.
- BYPASS
Selects BYPASS mode.
- ENHANCER
Enhances the sound quality of compressed input
signal.
3. USB mode only
- STOP (x x )
Stops playback.
- PLAY (B)
Starts playback.
- PAUSE(X X )
Pauses playback temporarily.
- REPEAT
Repeats track.
- SKIP (. . /> > )
Moves to the next or previous track.
4. DISPLAY
Accesses On-Screen display.
MENU
Access the menu on a disc.
SETUP
Accesses or removes setup menu.
TITLE
Displays the disc’s title menu, if available.
RETURN
Returns to the previous menu.
b
/B/v/V (left/right/up/ down)
Selects an option in the menu.
ENTER
Acknowledges the menu selection.
PRESET (-/+)
Selects program of Radio.
TUN. (-/+)
Tunes in the desired radio station.
5. 0-9 numerical buttons
Selects numbered options in a menu.
INPUT SELECT buttons
- TUNER : Selects an FM or AM broadcast
- DVD : Selects a DVD mode.
- PORTABLE : Selects a POTABLE mode.
- VCR : Selects a VCR mode.
- CD : Selects a CD mode.
- AV : Selects an AV mode.
- TV/STB : Selects a TV/STB mode.
- USB : Selects an USB mode.
- PC-LINK : Selects a PC-LINK mode.
PROG./CLEAR
Stores a radio station’s frequency in the tuner’s
memory.
HDMI1/2
Switches the HDMI mode to HDMI 1 and HDMI 2.
INPUT.SEL.
Selects the input settings.
6. M1, M2, M3
Loads and stores various settings on this buttons
you set at one time.
NIGHT
Reduces the dynamic range of Dolby Digital
material so that you can still hear quiet parts even
when listening at low volume levels
MO./ST.
Selects the mono or stereo during receiving a FM
broadcast.
D.SEL
Selects a card on the USB mode in case that more
than one memory cards are connected to the USB
port.
7. MUTE
Mutes the sound.
VOLUME (-/+)
Adjusts the volume.
Introduction