Linksys SRW224G4P - Manual (Page 11)


Configuration Using the Console Interface
24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet
Chapter 4
Chapter 4:
Confguraton Usng the
Console Interface
Overview
The Switch features a menu-driven console interface for
basic switch configuration . You can easily manage your
network from the screens through the console port .
Before you can use the console interface, you will need to
configure the HyperTerminal application .
Configuring the HyperTerminal Application
Click the Start button .
Select Programs > Accessores > Communcatons >
HyperTermnal .
Start > Programs > Accessories > Communications > HyperTerminal
Enter a name for this connection . In the example, the
name of the connection is SRW224G4P . Select an icon
for the application, then click OK .
HyperTerminal Connection Description Screen
1 .
2 .
3 .
Select a port to communicate with the switch . Select
COM1 or COM2 .
HyperTerminal Connect To Screen
Set the serial port settings as follows, then click OK .
Bits per Second: 8400
Databits: 8
Parity: None
Stop bits: 1
Flow control: None
HyperTerminal Properties Screen
4 .
5 .