Acl > ip based acl, Acl > mac based acl, Acl > ip based acl acl > mac based acl – Linksys SRW224G4P User Manual

Page 29: Chapter, Configuring the switch

Advertising
background image

Chapter 

Configuring the Switch

2

24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet

ACL > IP based ACL

ACL > IP based ACL

Target

Select the New ACL Name option and enter

an ACL name in the text field provided (with up to 16
characters) . To add rules to an existing ACL, select the
ACL Name option and select an ACL from the drop-down
menu .

Acton

An ACL can contain any combination of permit or

deny rules .

Protocol

Specifies the protocol type to match as TCP,

UDP or Others, where others indicates a specific protocol
number (0-255) . (Options: TCP, UDP, Others; Default: ANY)

TCP Flags

Specify the TCP flag bits in byte 14 of the TCP

header by selecting Set or Unset from the drop-down
menus . The following TCP flags may be specified:

Urg

Urgent pointer

Rst

Reset

Ack

Acknowledgement

Syn

Synchronize

Psh

Push

Fn

Finish

Source/Destnaton Port (0-)

Source/destination

port number for the specified protocol type . (Range: 0-
65535)

Use the Source/Destination IP Address option to apply the
ACL rule to an IP address or select the Any option to apply
the rule to all IP addresses .

Source/Destnaton IP Address

Enter a source or

destination IP address .

Wldcard Mask

Enter the Wildcard Mask for the Source/

Destination IP addresses .

Match CoS

Packet priority settings based on the following

criteria:

DSCP

DSCP priority level . (Range: 0-63)

Precedence

IP precedence level . (Range: 0-7)

Then click the Add to Lst Button

To remove an ACL rule, select an ACL rule from the table
and click Remove .

When all rules are removed from the ACL the ACL is also
removed .

ACL > MAC based ACL

ACL > MAC based ACL

Target

Select the New ACL Name option and enter

an ACL name in the text field provided (with up to 16
characters) . To add rules to an existing ACL, select the
ACL Name option and select an ACL from the drop-down
menu .

Acton

An ACL can contain any combination of permit or

deny rules .

Use the Source/Destination MAC Address option to apply
the ACL rule to a MAC address or select the Any option to
apply the rule to all MAC addresses .

Source/Destnaton MAC Address

Specify a MAC

address (for example, 11-22-33-44-55-66) .

Source/Destnaton Wldcard Mask

Hexadecimal mask

for source or destination MAC address .

VLAN ID

Specify a VLAN ID . (Range: 1-4094)

Advertising