Snmp > notification recipient, Admin, Admin > user authentication – Linksys SRW224G4P User Manual

Page 52: Chapter, Configuring the switch

Advertising
background image

Chapter 

Configuring the Switch

48

24-Port 10/100 + 4-Port Ggabt Swtch wth WebVew and Power over Ethernet

SNMP > Notification Recipient

SNMP > Notification Recipient

Recpent IP

IP address of a new management station to

receive notification messages .

Notfcaton Type

Notifications are sent as traps or inform

messages . The informs option is only available for version
2c and 3 hosts . (Default: Traps are used)

SNMPv1,2

Communty Strng

Specifies a valid community string

for the new trap manager entry . (Range: 1-32 characters,
case sensitive)

Notfcaton Verson

Indicates if the user is running

SNMP v1 or v2c . (Default: v1)

SNMPv3

User Name

The name of user connecting to the SNMP

agent . (Range: 1-32 characters)

Securty Level

When trap version 3 is selected, you

must specify one of the following security levels . (Default:
noAuthNoPrv)

noAuthNoPrv

There is no authentication or encryption

used in SNMP communications . (This is the default for
SNMPv3 .)

AuthNoPrv

SNMP communications use authentication,

but the data is not encrypted (only available for the SNMPv3
security model) .

AuthPrv

SNMP communications use both authentication

and encryption (only available for the SNMPv3 security
model) .

UDP Port

Specifies the UDP port number used by the

trap manager .

Tmeout

The number of seconds to wait for an

acknowledgment before resending an inform message .
(Range: 0-2147483647 centiseconds; Default: 100
centseconds
)

Retry tmes

The maximum number of times to resend

an inform message if the recipient does not acknowledge
receipt . (Range: 0-255; Default: )

Admin

The Admin tab provides access to system administration
settings and tools . It includes the following screens:

Admin > User Authentication

Admin > User Authentication

The Switch supports up to 6 user names and passwords
for management access (console and web interfaces) .
The default user name is “admn” with no password . You
should therefore assign a new password for the “admin”
user account and store it in a safe place . The default
“admin” account cannot be deleted from the system .

As well as the default “admn” account, up to five other
user-defined accounts can be created on the Switch . To
create a new user account, enter a user name and password
up to eight characters long, confirm the password, and
then click Add .

To change the password for a specific user, select the user
name from the list, enter the new password, confirm the
password by entering it again, and then click Update .

Advertising