Lennox Hearth BLOWER KIT LBLK-100 - Manual (Page 2)

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE. 2
Step 9B. Next, rest the blower on the cabinet bottom ( see Figure 5 ).
Figure 5
LBLK-100 Blower Resting On Cabinet Bottom
Blower Access Cutout
Step 9C. Now gently slide the blower assembly towards the back of the
fireplace (
see Figure 6 ).
Step 9D. Rotate the blower assembly so the base rests on the cabinet
bottom (
see Figure 7 ).
Figure 6
Cabinet Bottom
Figure 7
Cabinet Bottom Blower Assembly Base
Step 9E. Place the blower assembly in its final position at the back of the
cabinet bottom, resting on the blower mounting tabs (
see Figure 8 ).
Bend the mounting tabs over the blower base to secure.
Figure 8
Blower Mounting Tab
Blower Assembly
Figure 4
Blower Access Cutout
Left Side Of Blower Assembly Tilted Into Access Cutout
Step 9. - Installing The LBLK-100 Blower
9A. First, tilt the left side of the blower into the cutout (
see Figure 4 ).
Blower Base