LaCie 324I - Manual (Page 16)

LaCie 324i LCD Monitor Getting Connected
User Manual page 16
2.1.5. Power Cable and Power Switch
1. Connect the female end of the power cable to the monitor
( Fig. 06 , a).
2. Connect the male end of the power cable to a compatible
electrical receptacle ( Fig. 07 ). For example, an electrical out-
let on the wall.
3. Turn the Power Switch to the “l” position ( Fig. 06 , b). The
monitor can now be turned on using the Power Button on the
front panel of the 324i (
1.5.1. Front View and Button Func-
tions ).
To avoid potential electrical problems with your LaCie 324i moni-
tor, please pay close attention to the following:
✦ Only use the power cable supplied with your specific LaCie
monitor. Do not use a power cable from another LaCie de-
vice or another manufacturer. Using any other power cable
or power supply may cause damage to the device and void
your warranty.
✦ Always remove the power cable before transporting your
LaCie monitor. Failure to remove the power cable may re-
sult in damage to your monitor and will void your warranty.
✦ You may use your LaCie monitor when in a foreign country
thanks to its 100-240 Volt power supply. To use this fea-
ture, you may need to purchase an appropriate adapter or
cord. LaCie accepts no responsibility for any damage to the
drive resulting from the use of an inappropriate adapter.
Using an adapter other than one authorized by LaCie will
void your warranty.
Fig. 06
Fig. 07
a b