LaCie 324I - Manual (Page 24)

LaCie 324i LCD Monitor Quick Reference
User Manual page 24
3.2. Picture-in-Picture (PiP)
Use PiP to view a secondary video source. The following explains
how to use the OSD to turn on and manage PiP. See
4.2. OSD:
Picture-in-Picture (PiP) for further information on PiP options in
the OSD.
3.2.1. Enable/Disable PiP
Menu
Use the OSD to turn PiP on or off:
1. Press the MENU button on the front of the 324i.
2. Scroll to the PiP heading (PiP icon) using the Up or Down
arrow. Press ENTER.
3. If PiP is not on, the selection will be Mode: Off . Press ENTER
to open the sub-window for the ON or OFF checkboxes. Tap
the Down arrow to choose ON . The PiP window should ap-
pear on the screen.
4. Tap MENU to return to the PiP options. Scroll through the
options using the Up/Down arrows. Tap ENTER to select an
option and make your choices in a similar fashion (see also
4.1. OSD Navigation ).
5. Use the same procedure to turn off PiP .
Hot Key
The MENU button can turn PiP on or off:
1. Press the MENU button for five seconds.
2. The PiP window will:
✦ Appear if it was not active
✦ Disappear if it was active.
3. When PiP is enabled, go to the OSD for further options.
TECHNICAL NOTE: PiP may be enabled in DVI and DisplayPort
modes. HDMI or Component sources may be used as the second-
ary video.