Land Pride FPS48 - Manual

35
Food Plot Seeder, Plot Ranger
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
,
FPS48 Model
Description Specification
Hitch Type Pull type with optional 2" ball hitch or clevis hitch
Base Unit Weight 370 lbs.
Base Unit Weight with
Spin Spreader and Packer 510 lbs.
Disc Cutting Width 40" to 50"
Minimum ATV Size 350 cc
Minimum Tractor/vehicle Size 17 hp
Height 52"
Length 104"
Width 54"
Weight Load on Each Disc 46 lbs.
Number of Disc Blades 8
Disc Blade Size & Type 16" Notched
Blade Spacing 7 1/2"
Transport / Gauging Tires 13" Diameter 4 ply tubeless
Bearing Hanger 3/8" Plate
Bearing Type, 2 per Gang Self Aligning, Sealed Bearing
Gang Tube 3" x 2"
Gang Axle 1" Square high carbon steel
Disc Angle Front Gang: 0, 7, 14 & 21 degrees
Rear Gang: 0, 7, 14 & 21 degrees
Frame Construction 2" x 2" Square tubular design
Lifting Device Ratchet Jack or Linear Actuator, 12 volt
Rear Axle pivot Type Greasable
Rear Roller Bearing Greasable
Optional Spin Spreader and Packer
Packer Roller Width 40 7/16"
Spreading Device Spin Spreader, 12V
Spreader Hopper Loading Height 42" off ground
Spin Spreader Volume/Capacity 2 cu. ft. (15 gallons) (100 lbs. Maximum capacity weight)
Spin Spreader Deflector Diverts seed to smaller spreading width. Seed rate charts calculated at 48"
Small Seed Restrictor Restricts small seed for smaller distribution levels.
322-118S continued on next page 6/03/09
Food Plot Seeder,
Plot Ranger