Trouble shooting (continued) – Lenoxx Electronics PH-5562 User Manual

Page 11

Advertising
background image

IB-PH5562-WM-E-010807

To erase ALL call records, make sure the phone
is not in use, press the DELETE button and hold
for 3 seconds, the display will show “DELETE
ALL?”, press the DELETE button again.

CHECK

Check with your telephone company if this service
is available and if you have subscribed for it.

The caller may have an unlisted or blocked number
to prevent Caller ID identification, or it may be an
overseas call or you may have noise on the line
during that call.

You picked up the phone before the second ring,
or your phone received unclear call information.
Static can cause this message.
If this condition persists, contact your local
telephone company to ensure that there is no
problem with your phone line.

Handset clip was not installed properly for wall
use. See page 8 for details.

TROUBLE SHOOTING (continued)

appears in the display..

Cannot erase all records in memory.

Caller ID displays words like

,

or

or

.

Your language is set for French or Spanish. To
reset the language, press and hold the DELETE
button and press the DOWN button, the display
will go to the contrast level setting, press the
DELETE button again then press the DOWN button.
When is flashing, press DELETE button to
confirm. The language will be set to English mode.

Check if you have stored the numbers correctly
by pressing that memory location button(s). Also
numbers can only be stored when fresh batteries
are installed correctly.

Memory Dialing does not work.

Handset falls out of phone base
when wall mounted.

Caller’s information is not registered
to the Caller ID memory.

Message Waiting does not work.

Pressing a Memory button does not
display number.

Your MEMORY button has no stored number.
Please store the number again. Press the
STORE button, dial the number and press the
MEMORY locations you want.

PROBLEMS

Feedback or squealing when
using SPEAKERPHONE.

Volume is too high. Reduce the SPEAKER-
PHONE VOLUME control setting.

10

Check if shows in the display. Since the
REDIAL/PAUSE button has combined function
(pause function), the phone may have been
paused. Just press the HOOK switch.

REDIAL does not work.

IB-PH5562-WM-E-010807.pmd

1/23/2007, 5:08 PM

11

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Advertising