Wall mounting – Lenoxx Electronics PH-5562 User Manual

Page 9

Advertising
background image

IB-PH5562-WM-E-010807

WALL MOUNTING

1. HANDSET CLIP - When the phone is mounted on the wall, the HANDSET CLIP must be

adjusted so it will hold the HANDSET.

A. SLIDE OUT

B. REVERSE

C. REPLACE INTO PHONE

NOTE: For either desk use or wall mounting, you need to install the included adaptor correctly.
If you do not have a modular wall phone plate installed, please consult with your phone
company or installer to get one.

2. Put the straight telephone line cord into the wall adaptor, leave one end of the telephone

line cord about 7” and the other end about 3”.

4. Plug the longer wire about 7” into the top of the phone, plug the 3” wire into wall jack.

ABOUT 7 INCHES

(plug into phone jack)

ABOUT 3 INCHES

(plug into wall jack)

3. Install the wall adaptor on the bottom of

the base as the diagram on the right.

5. Put the phone over the wall plate, make sure both posts fit into slots on the back of

the phone. Then slide the phone down to lock the phone onto the wall plate.

8

IB-PH5562-WM-E-010807.pmd

1/23/2007, 5:08 PM

9

PDF created with pdfFactory Pro trial version

www.pdffactory.com

Advertising