LG DX0002TM User Manual

Page 46

Advertising
background image

*Refer to the rating plate on your dryer.

The appearance and specifications listed in this guide may vary due to constant product improvements.

Description

Steam Dryer

Electrical Requirements*

Please refer to the rating label regarding detailed information.

Gas Requirements*

NG: 10–13 in. WC/LP: 10–13 in. WC (Gas Models only)

Dimensions

27" (W) X 30" (D) X 38

11

/

16

" (H), 50" (D with door open)

68.6 cm (W) X 76.1 cm (D) X 98.3 cm (H), 127 cm (D with door open)

Net Weight

131lb. (59.4kg)

Drying Capacity

- Normal Cycle

IEC 7.3 cu.ft. (22.5 lbs./10.2 kg)

- Steam Cycle

IEC 7.3 cu.ft. (8 lbs./3.6 kg)

Steam Dryer™ Models DLEX0001TM, and DLGX0002TM

KEY DIMENSIONS AND SPECIFICATIONS

STACKING KIT INSTALLATION

(cont.)

3

Place the dryer on top of the washer by

fitting the dryer feet into the side brackets as

illustrated. Avoid finger injuries; do not allow

fingers to be pinched between the washer

and dryer. Slowly slide the dryer toward the

back of the washer until the side bracket

stoppers catch the dryer feet.

4

Insert the front rail between the bottom of

the dryer and the top of the washer. Push the

front rail toward the back of the washer until it

comes in contact with the side rail stoppers.
Install the two remaining screws to secure the
front rail to the side rails.

Washer

Dryer

46

Advertising