Lumens Technology PS760 - Manual (Page 30)

English - 29
7.10.2 Adjust the volume of the video
 In PLAYBACK mode, Press [] or [] to adjust the volume of
the video.
7.11 I would like to capture images
7.11.1 Capturing and saving images
1. Press [CAPTURE] on the remote control or control panel to
capture and save images.
 You cannot capture images when the capture mode is set to
[Disable]. If it is set to [Continuous], you can capture images
continuously. Press [CAPTURE] to start capturing
continuously, or press [CAPTURE] again to exit.
 To change the quality of captured images, please refer to
7.11.2 Setting the quality of captured images .
 To change the settings of captured images, please refer to
7.11.3 Setting continuous capture .
7.11.2 Setting the quality of captured images
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Storage] menu.
3. Press [] to find [Image Quality].
4. Press [] or [] to select among [High/Medium/Low].
5. Press [MENU] to exit.
7.11.3 Setting continuous capture
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Setting] menu.
3. Press [] to find [Capture Action].
4. Press [] or [] to select [continuous].
5. Press [] to the [Capture Mode].
6. Press [] or [] to select [Photo].
7. Press [] to find [Capture Time]; Press [] or [] to select capture
time.
8. Press [] to find [Capture Interval]; Press [] or [] to select
interval time.
9. Press [MENU] to exit.