Lumens Technology PS760 - Manual (Page 46)

English - 45
3 Select the [Microscope] mode
3.1. If you use the remote control or the control panel
3.1.1. Press [MENU] to enter the setting menu.
3.1.2. Press [] or [] to the [Display].
3.1.3. Press [] to select [Mode].
3.1.4. Press [] or [] to the [Microscope].
4 If the image is not clear
4.1. Please adjust the focus of microscope.
4.2. Please press the remote control or the control panel [AUTO TUNE]
button to activate the auto focus.
5 Digital Zoom
5.1. If you use the remote control or the control panel
5.1.1. Press [MENU] to enter the setting menu.
5.1.2. Press [] or [] to the [Display].
5.1.3. Press [] to select [Digital Zoom].
5.1.4. Press [] or [] to the [On].
5.1.5. Press [ZOOM +] / [ZOOM -].
<Note> Please reset to normal mode after using the microscope,
otherwise, you are unable to use zoom in/out function.
1. Press [MENU] on the remote control or control panel to enter the
setting menu.
2. Press [] or [] to the [Display].
3. Press [] to select [Mode].
4. Press [] or [] to the [Normal].