LG RD-JT30 - Manual (Page 23)

DLP Personal Projector 19
Shutdown
1. Press POWER and a warning message will appear. To turn off the
projector, press POWER again.
2. To cool down the projector, the fan will continue to run for approximately 90
seconds, during which the LED will flash.
* After the projector is turned off, there is a 90-second cooling period before the projector
can be re-started.
3. Disconnect the power cord from the wall socket.
Caution
• Please do not unplug the power cord before POWER is shut down or
during the two-minute cooling process.
• If the projector is not properly shut down, to protect the lamp, the sys-
tem will detect this and cool the lamp for 90 seconds automatically
before turning on again.
POWER
SOURCE MENU
POWER SOURCE
AUTO BLANK
(110V) (220V)