Lyngdorf Audio RoomPerfect RP-1 - Manual (Page 12)

1 2
Connecting the RP-1
The photos used are only meant as visual aids to show the versatility of the RP-1,
Lyngdorf Audio doesn’t necessarily carry all other products with the described speci-
fi cations in the product assortment.
Connecting to sources and amplifi ers
The RP-1 is very simple to hook up. There are three basic ways to connect the RP-1 to your system.
1. Connect all sources to your preamplifi er and connect it to the RP-1 input.
Then connect the RP-1 output signal to a poweramplifi er.
Source(s)
Poweramp
DPA-1 Digital Pre-Amplifier
RP-1
Preamp
2. Connect a single audio source to the RP-1 input.
Then connect the RP-1 output signal to your integrated- or preamplifi er.
Source
DPA-1 Digital Pre-Amplifier
RP-1
Integrated amplifier / Preamp