Tv & set top box (or another vcr connections), Installation and setup – LG LH-CX245 User Manual

Page 11

Advertising
background image

Installation and Setup

11

S

D

E

R

S-VIDEO

INPUT

AERIAL

Rear of TV

SCART INPUT

A

Decoder (or another VCR)

• Make one of the following connections, depending

on the capabilities of your existing equipment.

Tips
• Depending on your TV and other equipment you

wish to connect, there are various ways you could
connect the DVD/VCR Combi receiver. Use one of
the connections described below.

• Please refer to the manuals of your TV, VCR,

Stereo System or other devices as necessary to
make the best connections.

Caution
• Make sure the DVD/VCR Combi receiver is connect-

ed directly to the TV. Select the correct AV input on
your TV.

• Do not connect your DVD/VCR Combi receiver to

TV via your DVD/VCR Combi receiver. The DVD
image could be distorted by the copy protection
system.

Basic connections (AV)

1. Connect the EURO AV1 AUDIO/VIDEO on the

rear panel of the DVD/VCR Combi receiver to the
scart input socket on the TV using a SCART lead
(E).

2. You can connect such a Set Top Box (or another

VCR) to the DVD/VCR Combi receiver (D).

Basic connections (RF)

1. Connect the aerial cable (A) from your indoor/ out-

door aerial to ANT.IN jack on the rear panel of
DVD/VCR Combi receiver.

2. Connect the supplied RF cable (R) from the

RF. OUT jack on the rear panel of DVD+VCR
Receiver to your television’s Aerial Input.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD/VCR
Combi receiver to the S-VIDEO IN jack on the TV
using the S-Video cable (S).

Notes

• The signal of S-VIDEO OUT jack will output only

when the function mode is selected to CD/DVD.

• When you connect the DVD/VCR Combi receiver to

your TV, be sure to turn off the power and unplug
both units from the wall outlet before making any
connections.

TV & Set Top Box (or another VCR Connections)

Installation and Setup

TV & Set Top Box (or another VCR)

Advertising