LG LH-CX245 - Manual (Page 14)

14
Notes
• Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are
reversed, the sound will be distorted and will lack base.
• If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the
speakers.
• Do not remove the front cover of supplied speaker.
Front Speaker
(Right)
Front Speaker
(Left) Centre Speaker
Rear Speaker
(Right Surround)
Rear Speaker
(Left Surround)
Subwoofer
Speaker System Connection
Connect the speakers using the supplied speaker cords.
To obtain the best possible surround sound, adjust the speaker parameters; distance, level, etc..
1
2
3
a a
A B
A
B
Make the leagth here
as short as possible.
About Ferrite Core
Be sure to attach the ferrite core to the speaker cables
(for connecting to this unit).
This ferrite core can reduce noises.
How to attach the ferrite core
1. Push the stopper
[
a
]
of the ferrite core to open.
2. Wind the Subwoofer cable three times on the ferrite
core (A). Wind the Subwoofer cable once on the
ferrite core (B).
3. Pass the others straight on the ferrite core (B).
4. Close the ferrite core until it clicks.
Notes
• Take care not to pinch the speaker cables between the
ferrite cores.
• Attach the ferrite core near the unit (Refer to the fig.3 and
comment.).