Introduction, Setting the output source – LG LH-CX245 User Manual

Page 4

Advertising
background image

To ensure proper use of this product, please read this
owner’s manual carefully and retain for future
reference.

This manual provides information on the operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
location.

Symbol Used in this Manual

The lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.

The exclamation point alerts you to the pres-
ence of important operating and maintenance
/ servicing instructions.

Indicates hazards likely to cause harm to the
unit itself or other material damage.

Note:

Indicates special notes and operating features.

Tip:

Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols
is applicable only to the disc represented by the sym-
bol.

DVD and finalized DVD±R/RW

Video CDs

Audio CDs

MP3 Discs

WMA Discs

JPEG Discs

DivX Discs

About the

Symbol Display

” may appear on your TV display during opera-

tion and indicates that the function explained in this
owner’s manual is not available on that specific DVD
video disc.

Notes on Discs

Handling Discs
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.

Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sun-
light.

Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.

Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.

DivX

JPEG

WMA

MP3

CD

VCD

DVD

Setting the Output Source

You must select one of your output sources (DVD or
VCR) to view on the TV screen.

• If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator on the front panel lights and output
source of DVD deck is viewed on the TV screen.

• If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator on the front panel lights and output
source of VCR deck is viewed on the TV screen.

Introduction

4

Advertising