Reference – LG LH-CX245 User Manual

Page 49

Advertising
background image

Reference

49

Symptom

No power.

The power is on, but
the DVD/VCR Combi
receiver does not work.

No picture.

No sound.

The playback picture is
poor.

The DVD/VCR Combi
receiver does not start
playback.

Cause

The power cord is disconnected.

No disc is inserted.
No tape is inserted.

The TV is not set to receive DVD/VCR
Combi receiver signal output.

TV/VCR mode for DVD/VCR Combi
receiver is set to TV.

The video cable is not connected
securely.

The connected TV power is turned off.

The equipment connected with the audio
cable is not set to receive DVD/VCR
Combi receiver signal output.

The audio cables are not connected
securely.

The power of the equipment connected
with the audio cables is turned off.

The digital audio output is set to the
wrong position.

The disc is dirty.

Tape heads are dirty.

Tape is a rental or was recorded on
another DVD/VCR Combi receiver.

No disc is inserted.
No tape is inserted.

An unplayable disc is inserted.

The disc is placed upside down.

The disc is not placed within the guide.

The disc is dirty.

The Rating level is set.

Correction

Plug the power cord into the wall outlet
securely.

Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)

Select the appropriate video input mode
on the TV so the picture from the
DVD/VCR Combi receiver appears on

the TV screen.

Press the TV/VCR button on the remote
control repeatedly to choose VCR mode.
TV indicator disappears in the display
window.

Connect the video cable securely.

Turn on the TV.

Select the correct input mode on the audio
receiver so you can listen to the sound from
the DVD/VCR Combi receiver.

Connect the audio cables securely.

Turn on the equipment connected with
the audio cables.

Set the digital audio output to the
correct position, then turn on the
DVD/VCR Combi receiver again by
pressing POWER.

Clean the disc.

Clean video heads.

Use (

v

/

V

) for manual tracking

adjustment while tape is playing.

Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)

Insert a playable disc. (Check the disc
type, color system, and Regional code.)

Place the disc with the playback side down.

Place the disc on the disc tray correctly
inside the guide.

Clean the disc.

Cancel the Rating function or change the
rating level.

Check the following guide for the possible cause of a problem before contacting service.

Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your DVD/VCR Combi receiver the video head is auto-
matically cleaned. This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become
blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old
or damaged tapes might.

Advertising