Trip reset dte econ reset, Instrumentation – Lincoln 1999 Continental User Manual

Page 15

Advertising
background image

Warning messages that have been reset are divided into two categories:
• They will reappear on the display ten minutes from the reset.
• They will not reappear until an ignition OFF-ON cycle has been

completed. This acts as a reminder that these warning conditions still
exist within the vehicle.

TRIP

Press this control to display the first
of two trip odometers. Press it again
to display the second trip odometer.

To reset the displayed trip
odometer, press the RESET control.

DTE/ECON

• Press the DTE/ECON control

once to display the approximately
how far you can drive before
running out of fuel, or the
distance to empty (DTE). To ensure accuracy, turn the ignition OFF
when you fill the tank.

• Press the DTE/ECON control a second time to display the average fuel

economy in liters/100 kilometers or miles/gallon, based on distance
traveled and rate of fuel used information.

• To reset this feature, press the

RESET control while average fuel
economy is displayed (while you
are driving).

DTE is calculated using a running average fuel economy initialized by the
factory. This value is not the same as the average fuel economy display.
The running average fuel economy is based on more than 800 kilometers
(500 miles) of driving history, and is reinitialized if the battery is
disconnected.

If the FUEL LEVEL ERROR message is displayed, there is a problem
with the fuel indication system and you should contact your dealer for
service as soon as possible.

TRIP

RESET

DTE ECON

RESET

Instrumentation

15

Advertising