Lincoln 1999 Continental - Manual (Page 18)

under Operator Selectable Features. Refer to “Message Center” in this
chapter for more information on the Message Center controls. The
Message Center has a Driver ID control, which when pressed, allows the
driver to select either Driver 1, Driver 2 or OFF. Selecting OFF will turn
the system OFF.
Operator selectable features
The Memory Profile System and the Memory Profile Systen with Driver
Select System access to the following the vehicle features:
• Express window
• Auto door locks
• Horn chirp
• Easy entry/exit seat access
• Reverse mirrors
• Adjustable ride (Driver Select System only)
• Adjustable steering
• Autolamp on/delay time
• Instrument panel dim control
• Driver’s seat position
• Outside mirror position
Basic operation of Memory Profile System
In order for the system to be able to store or recall an individual’s seat or
mirror position preferences, the Memory Profile must first recognize who
will be driving the vehicle. Drivers may identify themselves to the system
one of two ways:
• Pressing the unlock control on the appropriate remote transmitter key
(DRIVER MEMORY 1 or DRIVER MEMORY 2 is identified by the
number on the back of the remote transmitter) before opening the
driver’s door.
• Entering either the DRIVER MEMORY 1 or DRIVER MEMORY 2
personalized code into the keyless entry keypad before opening the
driver’s door. For information on programming personalized codes see
Keyless entry system in the Control and features section.
Pressing OFF will turn the system off.
Instrumentation
18