Controls and features – Lincoln 1999 Continental User Manual

Page 91

Advertising
background image

3. Within five seconds of turning the ignition to OFF, insert the second
previously programmed SecuriLock

௢ key into the ignition and turn the

ignition from OFF to RUN (maintain ignition in RUN for at least one
second but no more than 5 seconds).

4. Turn the ignition to OFF and remove the second SecuriLock

௢ key

from the ignition.

5. Within 10 seconds of turning the ignition to OFF, insert the
unprogrammed SecuriLock

௢ key (new key) into the ignition and turn

the ignition from OFF to RUN (maintain ignition in RUN for at least one
second). This step will program your new SecuriLock

௢ key.

6. To program additional SecuriLock

௢ key(s), repeat this procedure from

step 1.

If the programming procedure was successful, the new SecuriLock

key(s) will start the vehicle’s engine. The theft indicator (located on the
instrument cluster) will light for three seconds and then go out.

If the programming procedure was not successful, the new SecuriLock

key(s) will not operate the vehicle’s engine. The theft indicator will flash
on and off. Wait at least one minute and then repeat the procedure from
step 1. If failure repeats, bring your vehicle to your dealership to have
the spare SecuriLock

௢ key(s) programmed.

Controls and features

91

Advertising