Mounting of cables – Linak LA36 User Manual

Page 16

Advertising
background image

16

Mounting of cables

• Unscrew the cover and remove the two blind plugs
• Plug in the power cable and/or the signal cable
• Slide the cover onto the actuator
The torque of the cover screw is +/- 0.3 Nm

TORX 25IP

Note: When changing the cables on a LINAK actuator, it is important that
this is done carefully, in order to protect the plugs and pins. Please be sure
that the plug is in the right location and fully pressed in before the cable lid
is mounted.

Advertising