Linak LA36 - Manual (Page 19)

19
Product Metal scrap Cable scrap Electronic scrap Plastic recycling or
combustion
LA36 X X X X
Main groups of disposal
Label for LA36
LINAK’s products may be disposed of, possibly by dividing them into different waste groups for
recycling or combustion.
We recommend that our product is disassembled as much as possible at the disposal and that
you try to recycle it. As examples of main groups within sorting of waste we can mention the
following:
Metal scrap
Plastic scrap
Cable scrap
Combustible material and collection for recoverable resources.
Some of these main groups can be sub-divided into groups e.g. metal can be divided into steel
and aluminium or plastic can be divided into ABS and PP.
LINAK APPLICATION POLICY
The purpose of the application policy is to defi ne areas of responsibilities in relation to applying
a LINAK product defi ned as hardware, software, technical advice, etc. related to an existing or
new customer application.
LINAK products as defi ned above are applicable for a wide range of applications within the
Medical, Furniture, Desk, and Industry areas. Yet, LINAK cannot know all the conditions under
which LINAK products will be installed, used, and operated, as each individual application is
unique.
The suitability and functionality of the LINAK product and its performance under varying
conditions (application, vibration, load, humidity, temperature, frequency, etc.) can only be
verifi ed by testing, and shall ultimately be the responsibility of the LINAK customer using any
LINAK product.
LINAK shall be responsible solely that the LINAK products comply with the specifi cations set
out by LINAK and it shall be the responsibility of the LINAK customer to ensure that the specifi c
LINAK product can be used for the application in question.